Plumbers NZ is New Zealand's largest online plumbing, gas and drainage resource. Plumbing exam help, plumbing news, directory and free quotes.

Author Topic: Old solar 60 panel  (Read 2404 times)

0 Members and 1 Guest are viewing this topic.

Offline foggy

  • Jr. Member
  • **
  • Posts: 63
  • Karma: +6/-0
Old solar 60 panel
« on: January 31, 2013, 09:33:58 PM »
Got a customer with an old solar 60 panel approx 15 yrs old. It has a polythene cover over the top of the panel approx 50mm above the copper tubes and the polythene is splitting.
Does anyone know if this is anything special and if you can get it from anywhere as it is easy to change and there's nothing wrong with the rest of the panel.
Anyone any idea's?

Linkback: https://www.plumbers.nz/solar-heating-and-heat-pumps/9/old-solar-60-panel/1355/

Offline integrated

  • Sr. Member
  • ****
  • Posts: 412
  • Karma: +37/-2
Re: Old solar 60 panel
« Reply #1 on: January 31, 2013, 09:53:18 PM »
hi foggy sounds similar to this - seems to be common - solar60 the old nova energy?


It is a recognized problem with the Solar60 panels, the plastic cover is the same stuff they use on green houses, It might last 5 -10 years on a green house but when exposed to high internal temperatures from inside the panel then it fails. Solare60 are fully aware of the issue, but no doubt will do nothing about it due to the cost.

Retro-fitting another glazing media like 1-1.5mm UV treated clear polycarbonate sheet could be an option, $100 for a 2400 x 1200 sheet, but this would be a DIY fix; it will however last > 10 years or so and is virtually bullet proof. I use it on my own panels, after 4 years in Wellingtons winds shows no sign of any deterioration. Was going to use glass but for the excessive cost from NZ suppliers.

Offline foggy

  • Jr. Member
  • **
  • Posts: 63
  • Karma: +6/-0
Re: Old solar 60 panel
« Reply #2 on: February 02, 2013, 01:29:04 PM »
Cheers integrated,
I thought it looked like the stuff used on green houses but the customer was told by someone at Nova energy that it was special stuff that was no longer available.
The polycarbonate sheet seems the way to go like you say just need to find one approx 2200 x 1550mm. Did you just silicon the sheet onto the frame or is there a better way?
Cheers

Offline Plumber

  • Administrator
  • Hero Member
  • *****
  • Posts: 736
  • Karma: +52/-2
  • ***#1 Plumber***
Re: Old solar 60 panel
« Reply #3 on: February 05, 2013, 11:01:50 AM »
Surely all panels must comply to some form of standard, possibly ECCA can shed some light on what that is. The glass or polycarbonate would have to be "toughened" and UV rated. Imagine you do the fix and further down the line the the thing breaks, falls and hurts someone, your up for some major liability. Like any other messy job I would rather walk away or do it properly. You can pick a new panel for about $1200 or evacs for about $800 and these come with all warranties. Even with the lower grade panels you will probably get more energy than fixing the old Nova/sola 60 one. Sorry to be so negative, If it was my house that's a different story if something happens then I can only blame myself.  :)
Please note that the advice I am giving is only my opinion and not necessarily a fact.  Please refer to our terms and conditions.


Share via digg Share via facebook Share via linkedin Share via twitter

Similar Topics

  Subject / Started by Replies / Views Last post
xx
Got Solar?

Started by Jayp

1 Replies
2043 Views
Last post March 12, 2010, 07:41:29 PM
by Blake
xx
Bad solar job

Started by o2b007

5 Replies
3063 Views
Last post April 03, 2013, 10:55:25 PM
by Smith Titos
xx
Is Solar Heating really worth it?

Started by newguy

16 Replies
14244 Views
Last post April 11, 2015, 03:54:52 PM
by Mylesgiraldo
xx
Solar is wourth it but watch out!

Started by jd24hrs

1 Replies
2254 Views
Last post August 22, 2010, 09:09:13 PM
by GMcT
 
Share this topic...
In a forum
(BBCode)
In a site/blog
(HTML)