Plumbers NZ is New Zealand's largest online plumbing, gas and drainage resource. Plumbing exam help, plumbing news, directory and free quotes.

Author Topic: Sitting Exams in AU  (Read 4816 times)

0 Members and 1 Guest are viewing this topic.

Offline jimmy007

  • Newbie
  • *
  • Posts: 1
  • Karma: +0/-0
Sitting Exams in AU
« on: May 19, 2009, 10:24:35 AM »
I believe we work in an open book industry if we don't know something we pick up the book and check even in modern job specs they now ask for us to have the relevant codes on site for referral, the exams should be based on finding the information needed obviously we need to know large amount off the top of our heads but so much in the exams is no longer or very rarely used and knowing where to find the information is more important than learning for a once off exam. Anyone heading over to oz to look at there exams will find this is the way is it time for the PGDB to take the step into the 21st century

Linkback: https://www.plumbers.nz/plumbing-international/15/sitting-exams-in-au/253/

Offline newguy

  • Jr. Member
  • **
  • Posts: 77
  • Karma: +8/-0
Re: Sitting Exams in AU
« Reply #1 on: May 19, 2009, 09:46:32 PM »
After reading all the comments on this forum, I am determined to do my exams in OZ! I cant believe the way things work around here! I did a drainlaying apprenticeship here in NZ with the Open Polytech, I paid over $1000 and have been studying for 12 months to find out that I cant find answers to half of the questions in the registration exams in the material the Open Polytech gave me. Whats going on?? I asked them how can a professional organisation train someone but at the same time have no say in what goes in the exams?? How will anyone that studies be able to answer questions they cant prepare for, I just don't get it! Whats wrong with these people?? How can the PGDB just make up questions? How can the PGDB not work together with training institutes of this country when it comes to the makeup of the exams? Why the hell would anyone want to sit an exam in NZ anymore??!! By the way PGDB, Your prescriptions are embarrassing!!

Offline stealth

  • Jr. Member
  • **
  • Posts: 6
  • Karma: +1/-0
Re: Sitting Exams in AU
« Reply #2 on: May 20, 2009, 06:22:09 PM »
Sack them all at the pgdb!!!!

Offline Edbear

  • Jr. Member
  • **
  • Posts: 84
  • Karma: +2/-0
Re: Sitting Exams in AU
« Reply #3 on: May 29, 2009, 03:37:57 PM »
I can see your point. What does the PGDB say?
I only know enough to know I don't know enough of what I need to know enough of...

Offline kiwichris

  • Jr. Member
  • **
  • Posts: 29
  • Karma: +3/-0
Re: Sitting Exams in AU
« Reply #4 on: May 30, 2009, 12:57:22 AM »
Yeah too right!

As I have said before.

They want you to pass in OZ. (especially WA) and it's all recipricol !!!!

Sometimes I wonder why I want to move back to NZ.

I'm telling you........ they will not fail you. They will persist with you until you pass thier requirements.
And the HELP YOU!!! They provide you with all the inormation. NO More - No less

KC
Born to fish - forced to work!

Offline jd24hrs

  • Full Member
  • ***
  • Posts: 128
  • Karma: +3/-0
Re: Sitting Exams in AU
« Reply #5 on: February 24, 2010, 03:30:19 PM »
just to tell you that the criminal pgdb(somebody on behalf of fern ururn) rang me and informed me that if i got my craftsman in oz they wouldnt accept it here  what a bunch of a--h---s
well i dont recognise them and if i want to plumb f------- bastards

Offline stealth

  • Jr. Member
  • **
  • Posts: 6
  • Karma: +1/-0
Re: Sitting Exams in AU
« Reply #6 on: March 02, 2010, 04:13:44 PM »
That's bullshit mate they are liars if you are a licenced plumber drainlayer and gasfitter in Australia that is the same level as Craftsman in NZ. If they didn't allow it Australia wouldn't recognise NZ licences... The training is better than NZ the tests are open book as you would work in the Field the business course took me one nights reading of a text book multiple choice questions on your tax obligations and understanding contracts FARKEN can't believe you guys are still putting up with this munch bunch FARK wits. No board even comes close to how NZ works 5 years licences no bullshit gas credit course shit and tops maybe $300 dollars for licence which covers the 3 trades whats that $100 a year..... Why are you still living there.........?

Offline vanps

  • Jr. Member
  • **
  • Posts: 7
  • Karma: +0/-0
Re: Sitting Exams in AU
« Reply #7 on: March 10, 2010, 09:30:33 PM »
Just looking at options for doing Craftsman, sounds like Oz is the way to go, how do you go about it, any-one got contact details etc???


Share via digg Share via facebook Share via linkedin Share via twitter

Similar Topics

  Subject / Started by Replies / Views Last post
xx
Sitting Exams in the next couple of weeks?

Started by Jaxcat

2 Replies
2264 Views
Last post June 14, 2012, 10:22:15 AM
by Rodza1
xx
any chch plumbers sitting cert plumb exams this june? study group???

Started by roberto

0 Replies
1365 Views
Last post January 04, 2014, 05:31:34 PM
by roberto
xx
sitting nov certifying .......aaaaaarrrrrrrrrrghhhhh

Started by pugsy

8 Replies
3475 Views
Last post October 31, 2016, 10:00:37 PM
by Jaxcat
xx
sitting certifing nov 2017

Started by roberto

4 Replies
2993 Views
Last post May 03, 2017, 09:28:59 PM
by rocketeer2
 
Share this topic...
In a forum
(BBCode)
In a site/blog
(HTML)