Plumbers NZ is New Zealand's largest online plumbing, gas and drainage resource. Plumbing exam help, plumbing news, directory and free quotes.

Author Topic: Guide to Gas Cylinders  (Read 2887 times)

0 Members and 1 Guest are viewing this topic.

Offline Plumber

  • Administrator
  • Hero Member
  • *****
  • Posts: 736
  • Karma: +52/-2
  • ***#1 Plumber***
Guide to Gas Cylinders
« on: April 23, 2009, 10:33:29 PM »
The Chief Inspector of Dangerous Goods has discretionary powers of approval for many aspects of the use of cylinders. The current approvals are summarised in this guide, which has been prepared for the assistance and guidance of persons and organisations involved in any way with compressed gas cylinders. This guide MUST be read in conjunction with the Dangerous Goods Act 1974, the Dangerous Goods (Labelling) Regulations 1978, and the Dangerous Goods (Class 2 - Gases) Regulations 1980 and Amendments.

Table of Contents
ANTECEDENTS
PART 1: GENERAL
1.1 Introduction
1.2 Scope
1.3 Legal Requirements
1.4 Glossary of Terms
1.5 Abbreviations
PART 2: PROCEDURES AND CRITERIA FOR APPROVAL OF CYLINDERS
2.1 General
2.2 Summary of Required Procedure
2.3 Specifications
2.4 Design Requirements
2.5 Inspection After Manufacture
2.6 Transferred to 2.4.4
2.7 Examination in New Zealand
2.8 Cylinder Exemption Scheme
PART 3: TYPE OF GAS
3.1 General
3.2 Permanent Gases
3.3 Liquefiable Gases
3.4 Acetylene
3.5 Other Gases
PART 4: MARKING AND LABELLING
4.1 General Requirements
4.2 Regulations
4.3 Interpretation of the Regulations
4.4 Contents Identification by Colour
4.5 Alterations to Marks or Labels
PART 5: NECK THREADS, VALVES AND FITTINGS, LUBRICANTS
5.1 Cylinder Neck Threads
5.2 Valve Specifications
5.3 Valve Protection
5.4 Valve Removal and Replacement
5.5 Safety Devices
5.6 Marking of Valves and Fittings
5.7 Lubricants
PART 6: TRANSPORTATION, STORAGE AND USE
6.1 General
6.2 Cylinder Attitude
6.3 Transportation
6.4 Care and Maintenance
6.5 Storage
6.6 Repair of Cylinders
PART 7: FILLING OF CYLINDERS
7.1 General
7.2 Filling Conditions for Permanent Gases
7.3 Filling Conditions for Liquefiable Gases
7.4 Filling Stations
PART 8: PERIODIC INSPECTION AND TESTING
8.1 Required Procedures
8.2 Inspection and Test Periods
8.3 Fire Extinguishers
8.4 Acetylene Cylinders
8.5 Cylinders that Cannot be Inspected Internally
8.6 Approved Testing Stations
8.7 Identification and Marking of Approved Cylinders
8.8 Colour Code for Identification of Retest
8.9 Rejected Cylinders
PART 9: IDENTIFICATION OF CYLINDERS AND ACCESSORIES
9.1 Identification of Approved Cylinders
9.2 Currently Approved Standards and Specifications for Cylinders
9.3 Previously Approved Specifications for Cylinders
9.4 Approved Specifications for Valves and Fittings
9.5 Approved Lubricants and Sealants
9.6 Approved Porous Masses for Acetylene Cylinders
PART 10: NOTES ON PARTICULAR CASES
10.1 Cylinders used on Vessels or Aircraft, or for Liferaft Inflation
10.2 Hydraulic Accumulators and Cylinders Connected to Compressing Systems
10.3 Vehicle Fuel Tanks and Forklift Cylinders
10.4 SCUBA Cylinders
10.5 LPG Cylinders
10.6 Exempt Cylinders
10.7 Carbon Dioxide Cylinders
10.8 DOT Specifications-(Also additional welding requirements)
10.9 German Compressed Gas Regulations
10.10 Primus Cylinders
10.11 Notes on Some Specifications, and Restricted Approvals
10.12 Prohibited Cylinders
10.13 Verification of testing Mark
10.14 Test Pressures and Filling Pressures
10.15 Equivalent Metric and Imperial Pressures
10.16 Ozone Layer Protection Act 1990
PART 11: EVALUATION OF NECK CRACKING IN ALUMINIUM CYLINDERS
11.1 Introduction
11.2 Brief History of Shoulder Cracking
11.3 Research Carried Out on 6061 Alloy
11.4 Modes of Failure
11.5 Review of Tests Periods for Fibre-wrapped (BA) Cylinders
APPENDIX: ALUMINIUM ALLOY DIVE CYLINDER RECALL EDUCATIONAL PACKAGE


Linkback: https://www.plumbers.nz/health-and-safety/29/guide-to-gas-cylinders/239/
Please note that the advice I am giving is only my opinion and not necessarily a fact.  Please refer to our terms and conditions.


Share via digg Share via facebook Share via linkedin Share via twitter

Similar Topics

  Subject / Started by Replies / Views Last post
clip
Best Practice Guide for Gasfitters

Started by robbo

7 Replies
3948 Views
Last post September 23, 2013, 03:52:27 PM
by Watchdog
xx
Guide for Safety With Underground Services

Started by Plumber

0 Replies
2686 Views
Last post April 23, 2009, 10:37:35 PM
by Plumber
clip
Guide for Safety with Underground Services

Started by Plumber

0 Replies
2299 Views
Last post March 28, 2012, 07:11:51 PM
by Plumber
xx
LPG Hot Water Cylinders

Started by Edbear

2 Replies
2758 Views
Last post August 05, 2009, 03:22:06 PM
by Edbear
 
Share this topic...
In a forum
(BBCode)
In a site/blog
(HTML)