SEE ANY SPAM? PLEASE REPORT IT, TO KEEP OUR COMMUNITY CLEAN.

Author Topic: LPG Wok Burner  (Read 1617 times)

0 Members and 1 Guest are viewing this topic.

Offline integrated

  • Sr. Member
  • ****
  • Posts: 412
  • Karma: +37/-2
LPG Wok Burner
« on: April 07, 2013, 07:46:50 PM »
Hi all,

I have a job to do coming up where the owner wants a wok burner that is not functioning properly (read does not give out sufficient flame and heat) swapped out to a known good burner

I suspect that the burner simply has a blockage somewhere within the burner itself as all other burners appear to be same brand/model and are all operating fine - the flame picture on said faulty burner is fine at all jet nozzles so it has to be a supply issue just prior?

I have not had anything to do with wok burners prior to this

this is a high pressure supply situation - 150 kPa - thats what the regulator guage tells me (i thought this was too high) I think owner has wound it up trying to get decent flame on said faulty burner?

I am still deciding whether i want to know about or attempt this job

Is there anything that anyone knows of that I should possibly check? Is there anything else I should be looking for?

Cheers all, Integrated

Linkback: https://www.plumbers.nz/gas-station/11/lpg-wok-burner/1412/

Offline Jaxcat

  • Hero Member
  • *****
  • Posts: 1008
  • Karma: +40/-4
Re: LPG Wok Burner
« Reply #1 on: April 07, 2013, 08:06:15 PM »
Doesit have  a badge plate and is it on the ESS register?  if not don't touch it.
Have you learned lessons only of those who admired you, and were tender with you, and stood aside for you?  Have you not learned great lessons from those who braced themselves against you, and disputed the passage with you?  (Walt Whitman 1819-1891)  American Poet

Offline integrated

  • Sr. Member
  • ****
  • Posts: 412
  • Karma: +37/-2
Re: LPG Wok Burner
« Reply #2 on: April 07, 2013, 08:39:42 PM »
Doesit have  a badge plate and is it on the ESS register?  if not don't touch it.



No it looks to be a custom jobby Jax - 6 burner wok station, I have had a quick look as I was there to sort other issues - he subsequently found out I do gas also - chinese restaurant

I have not yet had a good look for data plate

Offline integrated

  • Sr. Member
  • ****
  • Posts: 412
  • Karma: +37/-2
Re: LPG Wok Burner
« Reply #3 on: April 07, 2013, 09:15:16 PM »
had to widen search parameters but fairly certain I have found cert for property, so its ok there


with the wok burners are they a simple isolate/disconnect/unfix/replace/refix/recomminssion jobby? - the burner is dirty as hell and hard to tell whats what?!?


Share via digg Share via facebook Share via linkedin Share via twitter

Similar Topics

  Subject / Started by Replies / Views Last post
xx
Putting a Two ring gas burner in a well ventilated food trailer

Started by toby

0 Replies
1202 Views
Last post December 03, 2016, 02:53:31 PM
by toby
 
Share this topic...
In a forum
(BBCode)
In a site/blog
(HTML)