Plumbers NZ is New Zealand's largest online plumbing, gas and drainage resource. Plumbing exam help, plumbing news, directory and free quotes.

Author Topic: gas ovens  (Read 3147 times)

0 Members and 1 Guest are viewing this topic.

Offline martinkelly

  • Jr. Member
  • **
  • Posts: 5
  • Karma: +1/-1
  • Fastest Plumber/Gasfitter in town
gas ovens
« on: July 30, 2008, 12:46:07 PM »
Question from open poly to get my gas fitting credits
When re-commissioning an oven with a modulating thermostat you decide to include an oven door slam test. what is the purpose of this test?
can any one help with this one?

Linkback: https://www.plumbers.nz/gas-hobs-stoves-ovens/68/gas-ovens/12/

Offline martinkelly

  • Jr. Member
  • **
  • Posts: 5
  • Karma: +1/-1
  • Fastest Plumber/Gasfitter in town
Re: gas ovens
« Reply #1 on: July 30, 2008, 04:46:37 PM »
I guess to see if the burner goes out if so gas should be shut off by FFD  and oven will have to be reignited?

Offline SkinnyJ

  • Jr. Member
  • **
  • Posts: 4
  • Karma: +1/-0
  • Plumber/Gasfitter extraordinaire
Re: gas ovens
« Reply #2 on: July 30, 2008, 04:54:33 PM »
I would tend to agree with your guess. I beleive it is to make sure the oven burner/pilot does not get blown out when the door is slammed closed. most of the domestic gas ovens use a rectification flame failure and commercials use a pilot. hope this helps.

most of these sorts of tests are to simulate extreme conditions.

 ;D
Proudly doing my part for the deconstruction of society since 1980 :)
Mwuahahaha

Offline The Gasman

  • Newbie
  • *
  • Posts: 3
  • Karma: +2/-0
Re: gas ovens
« Reply #3 on: February 17, 2009, 05:38:18 PM »
Yep the only requirement for a "slam shut" test on a gas oven is to test if the flame goes out that the flame failure device works and shuts down all gas flow to the oven.


Share via digg Share via facebook Share via linkedin Share via twitter
 
Share this topic...
In a forum
(BBCode)
In a site/blog
(HTML)